Waste Water Treatment Hose
Peristaltic Pump Hose
Salem-Republic Rubber Company builds peristaltic pump hoses for waste water applications that are compatible with all major positive displacement pump manufacturers and offers custom built hoses to accommodate your specific requirements. Our “No-Crush” poly carcass is constructed using multiple plies of high tensile cord reinforcements, and the smooth precision ground concentric cover insures optimum performance and consistent flows.
- Sizes from 10mm to 150mm
- Smooth Precision Ground Cover
- Multi-ply High Tensile Cord Reinforcement
- Non-Standard or Custom Built Hoses Available
- Tube Compounds: Natural Rubber, EPDM, Nitrile (Buna-N), and FDA Safe White & Tan Materials
- For Watson-Marlow™, Blackmer™, Verder™, Ponndorf™, Periflo™, and all other Positive Displacement Pump Manufacturers
 |
ID
(mm) |
OD
(mm) |
Length
(in) |
ID (in) |
OD (in) |
Length (in) |
10 |
31.0 |
508.0 |
0.39 |
1.22 |
20.0 |
|
15 |
36.0 |
762.0 |
0.59 |
1.41 |
30.0 |
|
25 |
53.2 |
1006.4 |
0.98 |
2.09 |
39.6 |
|
32 |
61.0 |
1250.9 |
1.25 |
2.40 |
49.2 |
|
40 |
66.4 |
1489.0 |
1.57 |
2.61 |
58.6 |
|
50 |
80.0 |
1820.8 |
1.96 |
3.14 |
71.6 |
|
65 |
99.2 |
2336.8 |
2.55 |
3.90 |
92.0 |
|
80 |
122.0 |
2781.3 |
3.14 |
4.80 |
109.5 |
|
100 |
144.0 |
3276.6 |
3.93 |
5.66 |
129.0 |
Model Number Compatibility Chart:
Peristaltic Pump
Manufacturers |
10mm
|
15mm
|
25mm |
32mm |
40mm |
50mm |
65mm |
80mm |
100mm |
Albin Pump |
ALH10 |
ALH15 |
ALH25 |
ALH32 |
ALH40 |
ALH50 |
ALH65 |
ALH80 |
ALH100 |
Allweiler |
ASL10 |
ASH / ASL15 |
ASH / ASL25 |
ASH 25 |
ASH 40 |
ASH50 |
ASH65 |
ASH80 |
ASH100 |
Blackmer |
A10 |
A/AX 40 |
A65 |
A/AX 80 |
A100 |
||||
Periflo |
PF 10 |
PF 15 |
PF 25 |
PF 32 |
PF 40 |
PF50 |
PF50 |
PF80 |
PF100 |
Ponndorf |
PK 15 |
PK 25 |
PK40 |
PK50 |
PK50 |
||||
Verderflex |
VF 10 |
VD 15 |
VF 25 |
VF 32 |
VF40 |
VF50 |
VF50 |
VF80 |
VF100 |
Watson-Marlo / Bredel |
SPX10 |
SPX15 |
SPX25 |
SPX32 |
SPX40 |
SPX50 |
SPX50 |
SPX80 |
SPX100 |
Tube Diffusers
Salem-Republic Rubber Company offers a low cost solution for replacing tube diffusers. The slip-on tube diffuser membrane provides an easy and efficient way to replace a tube diffuser without replacing the whole assembly. The EPDM rubber membrane gives long life in harsh environments. Small perforated holes allow aeration when pressurized and keeps debris from entering when not in use. Fine pores, of the SRR design, form small bubbles that result in greater surface area and higher oxygen transfer.
- Water Treatment Applications
- EPDM Rubber Construction
- Standard Perforation (60 holes/in )
- Customized Size Perforation Available
Water Decant Hose Features
- Used as the flexible connection in the decant system of water treatment tanks.
- Constructed of a Corrosion Resistant, Elastomeric Tube, Carcass and Cover
- Provided with Full-Face Duck and Rubber Flange or Beaded Ends with Back-up Rings
- Vol-U-Flex Corrugated Cover provides a Tighter Bend Radius
Air Blower Hose Features
- Used to convey air to waste water treatment tanks.
- Tube & cover built with EPDM, Neoprene or other custom compounds
- Smooth or Vol-U-Flex corrugated cover
- Available with plain cut ends, flanges, soft cuffs, or beaded ends
Salem-Republic Rubber Company
Offers a wide variety of custom engineered industrial hose and calendered rubber products.
